Albuquerque Pool Pros provides professional variable-speed pumps & filtration in Albuquerque, NM for residential and commercial properties across the Albuquerque metro and the Rio Grande valley. Variable-speed pumps and filtration are the largest electrical load most Albuquerque homes add without thinking about it, and federal efficiency rules have now effectively retired the single-speed pool pump.
Power draw scales roughly with the cube of pump speed, so a variable-speed unit at 1,200 RPM for twelve hours moves the same water as a single-speed at 3,450 RPM for four while drawing a fraction of the energy.
It is also dramatically quieter, which matters when the pad sits against a neighbor's wall on a quarter-acre lot.
We replace pumps, re-plumb pads that were piped in undersized 1.5-inch line, and actually program the speed schedule, which is the step that gets skipped and the reason plenty of variable-speed pumps in this town are running on one high speed and saving nobody anything.
Filtration choice has a local wrinkle.
Cartridge filters are our default for Albuquerque residential pools, and the water argument is the strong one: cartridges do not backwash, so you are not sending hundreds of gallons of treated water to the sewer every few weeks in a metro that pays close attention to what it takes from the Rio Grande.
Cleaning is a hose-down two or three times a season. DE filters give the finest filtration and earn their keep on pools that fight spring cottonwood fluff and juniper pollen, which around here is a real category.
Sand is the cheapest and coarsest, and swapping the media for recycled glass improves it meaningfully.
We size the filter well above the pump's peak flow rather than matching it, because undersized filters are why so many pools run short cycles and cloudy water in monsoon season.
A pad rebuild here includes something warm-climate builders skip: laying the pad out so it can be winterized quickly. Unions where you need them, drain plugs reachable, valves positioned so lines can be isolated and blown out, everything bonded, and the plumbing labeled.
Done right, closing the pool in November takes an hour instead of an afternoon.
With 15+ years of experience, our licensed and insured team brings the right materials and equipment to every job — gunite and shotcrete shells, PebbleTec and polished quartz interiors, flagstone and travertine coping, high-efficiency heat pumps and gas heaters, variable-speed pumps, cartridge and DE filtration — and backs the work with a written workmanship warranty. We serve Albuquerque and nearby communities including Rio Rancho, Santa Fe, South Valley, Los Lunas.
What We Handle
Everything our variable-speed pumps & filtration in Albuquerque covers
One crew, one point of contact, and the full range of variable-speed pumps & filtration work in Albuquerque, NM. If it is on this list we do it in house rather than handing it to a subcontractor:
- variable-speed pool pump installation
- energy efficient pool pump
- pool pump replacement
- cartridge filter installation
- DE filter and grid replacement
- sand filter and media change
- pool filter cleaning
- turnover rate and flow calculation
- pool plumbing upgrade
- equipment pad rebuild
- pump motor repair
- freeze-safe equipment pad layout
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Albuquerque services.
Materials, equipment and how we do variable-speed pumps & filtration
The difference between variable-speed pumps & filtration that lasts and variable-speed pumps & filtration that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with gunite and shotcrete shells, PebbleTec and polished quartz interiors, flagstone and travertine coping, high-efficiency heat pumps and gas heaters, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Albuquerque job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. 15+ years of pool work in the Albuquerque metro and the Rio Grande valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do variable-speed pumps & filtration outside Albuquerque
Albuquerque Pool Pros covers Albuquerque and the surrounding communities of the Albuquerque metro and the Rio Grande valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Variable-Speed Pumps & Filtration in Rio Rancho, NM — Sandoval County, population 104,000
- Variable-Speed Pumps & Filtration in Santa Fe, NM — Santa Fe County, population 87,500
- Variable-Speed Pumps & Filtration in South Valley, NM — Bernalillo County, population 38,300
- Variable-Speed Pumps & Filtration in Los Lunas, NM — Valencia County, population 17,200
- Variable-Speed Pumps & Filtration in North Valley, NM — Bernalillo County, population 11,100
- Variable-Speed Pumps & Filtration in Grants, NM — Cibola County, population 9,160
Start on the Albuquerque Pool Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Albuquerque Chooses Albuquerque Pool Pros
- ✓Over 15 years building pools at 5,300 feet — caliche, hard water and hard freezes
- ✓Residential and commercial, from backyard gunite pools to hotel and HOA amenities
- ✓In-house crews from excavation through start-up, not rotating subcontractors
- ✓Heating and cover packages that turn an 11-week season into a six-month one
The standards behind variable-speed pumps & filtration
Quality here is not a matter of opinion — it is written down. The variable-speed pumps & filtration work we do in Albuquerque follows published industry standards: Pool & Hot Tub Alliance publishes the ANSI/APSP construction and barrier standards, and American Red Cross water safety sets out the layered-protection guidance every pool owner should read. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every variable-speed pumps & filtration project in Albuquerque gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free variable-speed pumps & filtration free estimate in Albuquerque, or request a quote and we'll get right back to you.