Albuquerque Pool Pros provides professional pool automation & controls in Albuquerque, NM for residential and commercial properties across the Albuquerque metro and the Rio Grande valley. Pool automation is worth more in Albuquerque than in warm-climate markets, and the reason is freeze protection. A control system watches air temperature and starts the pump before anything in the plumbing can freeze, automatically, at three in the morning, without anybody having to remember.
Every winter in this metro somebody loses a filter tank, a heater exchanger, or a pump housing to a cold snap that arrived a day earlier than forecast. An automation system is cheaper than one of those repairs.
Beyond that, a control system ties the pump, heater, salt cell, valve actuators, lights, and water features into a single panel with an app on top, so the pump schedule, the spa changeover, the heater setpoint, the light color, and the waterfall all happen on a timer or a tap.
We install and program complete systems and we replace the old mechanical time-clock setups that still run most pools in the North Valley and the Heights. The savings are real but conditional.
A variable-speed pump only delivers its efficiency when it is scheduled to run long and slow, and automation is what makes that happen reliably instead of the pump sitting on one high speed because nobody programmed it.
Heating a spa remotely so it is ready when you get home is worth more than it sounds in February.
Chemical automation goes further: an ORP and pH controller measures continuously and doses acid or adjusts salt cell output to hold a setpoint, which is genuinely valuable here because hard fill water makes pH drift constantly, and it is close to essential on commercial pools with real bather loads.
A typical install includes new valve actuators, a relay for lights and features, air and water temperature sensors, freeze protection setpoints, and a rebuild of the pad wiring, which on a lot of older Albuquerque pools is the actual problem hiding under everything else.
With 15+ years of experience, our licensed and insured team brings the right materials and equipment to every job — gunite and shotcrete shells, PebbleTec and polished quartz interiors, flagstone and travertine coping, high-efficiency heat pumps and gas heaters, variable-speed pumps, cartridge and DE filtration — and backs the work with a written workmanship warranty. We serve Albuquerque and nearby communities including Rio Rancho, Santa Fe, South Valley, Los Lunas.
What We Handle
Everything our pool automation & controls in Albuquerque covers
One crew, one point of contact, and the full range of pool automation & controls work in Albuquerque, NM. If it is on this list we do it in house rather than handing it to a subcontractor:
- pool automation installation
- smart pool controls
- app-based pool control
- automated valve actuators
- freeze protection automation
- chemical automation and ORP control
- automatic pH dosing
- pool control panel upgrade
- spa changeover automation
- wireless pool remote
- pool timer replacement
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Albuquerque services.
Materials, equipment and how we do pool automation & controls
The difference between pool automation & controls that lasts and pool automation & controls that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with gunite and shotcrete shells, PebbleTec and polished quartz interiors, flagstone and travertine coping, high-efficiency heat pumps and gas heaters, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Albuquerque job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. 15+ years of pool work in the Albuquerque metro and the Rio Grande valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do pool automation & controls outside Albuquerque
Albuquerque Pool Pros covers Albuquerque and the surrounding communities of the Albuquerque metro and the Rio Grande valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Pool Automation & Controls in Rio Rancho, NM — Sandoval County, population 104,000
- Pool Automation & Controls in Santa Fe, NM — Santa Fe County, population 87,500
- Pool Automation & Controls in South Valley, NM — Bernalillo County, population 38,300
- Pool Automation & Controls in Los Lunas, NM — Valencia County, population 17,200
- Pool Automation & Controls in North Valley, NM — Bernalillo County, population 11,100
- Pool Automation & Controls in Grants, NM — Cibola County, population 9,160
Start on the Albuquerque Pool Pros homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Albuquerque Chooses Albuquerque Pool Pros
- ✓Over 15 years building pools at 5,300 feet — caliche, hard water and hard freezes
- ✓Residential and commercial, from backyard gunite pools to hotel and HOA amenities
- ✓In-house crews from excavation through start-up, not rotating subcontractors
- ✓Heating and cover packages that turn an 11-week season into a six-month one
The standards behind pool automation & controls
Quality here is not a matter of opinion — it is written down. The pool automation & controls work we do in Albuquerque follows published industry standards: Pool & Hot Tub Alliance publishes the ANSI/APSP construction and barrier standards, and American Red Cross water safety sets out the layered-protection guidance every pool owner should read. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every pool automation & controls project in Albuquerque gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free pool automation & controls free estimate in Albuquerque, or request a quote and we'll get right back to you.