Albuquerque Pool Pros provides professional pool resurfacing & replastering in Albuquerque, NM for residential and commercial properties across the Albuquerque metro and the Rio Grande valley. Pool resurfacing and replastering comes due faster in Albuquerque than the manufacturer's brochure suggests, thanks to a combination unusual to this market: extreme high-altitude UV, hard fill water heavy in calcium, and a daily temperature swing that cycles the surface.
White plaster that might give fifteen years on the coast frequently goes chalky, rough, and mottled here around year eight or ten.
Once it is rough enough to skin a heel, it is also porous enough to hold algae in the pores, which is when people start buying chemicals to solve a surface problem. The job is mostly preparation.
We drain with the hydrostatic relief valve open — which matters more in the valley than people think — chip the old surface back to sound material, cut and clean the bond beam edge, repair delaminated and hollow areas, and reset returns, main drain covers, and light niches to the new finish depth.
Cheap resurfacing quotes are cheap because they skip this and bond a new coat to a failing one, and it delaminates in three or four years. Finish selection matters more here than almost anywhere.
We steer most Albuquerque customers away from white plaster and toward aggregate. Polished quartz — quartz crystals in colored cement — resists the etching that hard, aggressive water causes and typically lasts twelve to fifteen years.
Pebble finishes such as PebbleTec, pebble sheen, and mini-pebble are denser still, forgive the calcium in the fill water, and commonly run fifteen to twenty years at this altitude.
A mid-to-dark pebble blend also absorbs meaningfully more solar gain, which in a climate with 300-plus sunny days and a short season is free heat you would otherwise pay a heater for. Start-up is not a formality.
Fresh plaster cures underwater and can be permanently blotched by careless chemistry, and Albuquerque's high-calcium fill water needs handling from the first hose-full.
We fill continuously without stopping, brush daily for the first week, and manage pH, alkalinity, and calcium hardness through the cure so the finish sets hard and even.
Most resurfacing jobs run one to two weeks, and since the pool is already empty, it is the right moment to redo tile and coping too.
With 15+ years of experience, our insured team brings the right materials and equipment to every job — gunite and shotcrete shells, PebbleTec and polished quartz interiors, flagstone and travertine coping, high-efficiency heat pumps and gas heaters, variable-speed pumps, cartridge and DE filtration — and backs the work with a written workmanship warranty. We serve Albuquerque and nearby communities including Rio Rancho, Santa Fe, South Valley, Los Lunas.
What We Handle
Everything our pool resurfacing & replastering in Albuquerque covers
One crew, one point of contact, and the full range of pool resurfacing & replastering work in Albuquerque, NM. If it is on this list we do it in house rather than handing it to a subcontractor:
- pool replastering
- pebble pool finish
- PebbleTec and pebble aggregate
- polished quartz pool finish
- white plaster resurfacing
- pool interior refinishing
- acid wash vs resurfacing
- calcium scale and plaster etching
- rough pool surface repair
- pool resurfacing cost
- chip-out and bond coat
- plaster start-up and cure
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Albuquerque services.
Materials, equipment and how we do pool resurfacing & replastering
The difference between pool resurfacing & replastering that lasts and pool resurfacing & replastering that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with gunite and shotcrete shells, PebbleTec and polished quartz interiors, flagstone and travertine coping, high-efficiency heat pumps and gas heaters, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Albuquerque job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. 15+ years of pool work in the Albuquerque metro and the Rio Grande valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do pool resurfacing & replastering outside Albuquerque
Albuquerque Pool Pros covers Albuquerque and the surrounding communities of the Albuquerque metro and the Rio Grande valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Pool Resurfacing & Replastering in Rio Rancho, NM — Sandoval County, population 104,000
- Pool Resurfacing & Replastering in Santa Fe, NM — Santa Fe County, population 87,500
- Pool Resurfacing & Replastering in South Valley, NM — Bernalillo County, population 38,300
- Pool Resurfacing & Replastering in Los Lunas, NM — Valencia County, population 17,200
- Pool Resurfacing & Replastering in North Valley, NM — Bernalillo County, population 11,100
- Pool Resurfacing & Replastering in Grants, NM — Cibola County, population 9,160
Start on the Albuquerque Pool Pros homepage for a free estimate, or call (855) 498-0935 and describe the job.
Why Albuquerque Chooses Albuquerque Pool Pros
- ✓Over 15 years building pools at 5,300 feet — caliche, hard water and hard freezes
- ✓Residential and commercial, from backyard gunite pools to hotel and HOA amenities
- ✓In-house crews from excavation through start-up, not rotating subcontractors
- ✓Heating and cover packages that turn an 11-week season into a six-month one
The standards behind pool resurfacing & replastering
Quality here is not a matter of opinion — it is written down. The pool resurfacing & replastering work we do in Albuquerque follows published industry standards: Pool & Hot Tub Alliance publishes the ANSI/APSP construction and barrier standards, and American Red Cross water safety sets out the layered-protection guidance every pool owner should read. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every pool resurfacing & replastering project in Albuquerque gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (855) 498-0935 for a free pool resurfacing & replastering free estimate in Albuquerque, or request a quote and we'll get right back to you.