
Short version: an inground pool in Albuquerque usually costs $45,000 to $75,000 for gunite, $40,000 to $85,000 for fiberglass, and $35,000 to $65,000 for a vinyl liner — installed, before you start adding heaters and enclosures. Where you land inside that range comes down to two things: how big the pool is and what you wrap around it.
Here's the part the glossy brochures skip. That number isn't really "the pool." A hole in the ground full of water is maybe half the bill. The rest is decking, fencing, electrical, permits, and the dozen upgrades that sounded optional until you saw the empty concrete around your new pool and thought, "yeah, we need a patio too." Let's break down what you're actually paying for in the Albuquerque metro and the Rio Grande valley.
The quick answer, by pool type
Three materials, three price bands. This is the Albuquerque ballpark for a standard installed pool, not a bare shell:
| Pool type | Typical installed cost | Best for |
|---|---|---|
| Vinyl liner | $35,000 – $65,000 | Lowest entry price, softer surface |
| Fiberglass | $40,000 – $85,000 | Fast install, low upkeep |
| Gunite / concrete | $45,000 – $75,000 | Any shape, longest lifespan |
Gunite is the the Albuquerque metro and the Rio Grande valley default because it's fully custom and lasts 15 to 25 years before it needs resurfacing. Fiberglass gets you swimming faster, since the shell drops in a day instead of pouring concrete over weeks. Vinyl is the cheapest way in the water, with the catch that you'll replace the liner every 5 to 9 years at $4,000 to $10,000 a pop. Cheap to buy, not free to keep.
Cost by size (the number everyone actually wants)
Nobody shops for "a pool." They shop for "a pool that fits eight people and doesn't eat the whole yard." Size is the single biggest lever on price, so here's roughly what different footprints run for a gunite build in Albuquerque:
| Pool size | Approx. dimensions | Gunite cost range |
|---|---|---|
| Small (plunge / cocktail) | 10x20 ft | $35,000 – $50,000 |
| Medium (family) | 16x32 ft | $50,000 – $70,000 |
| Large | 20x40 ft | $70,000 – $95,000+ |
Every extra foot isn't just more water. It's more dirt to haul out, more rebar and concrete, more surface to finish, and more decking to ring it. That's why jumping from a 16x32 to a 20x40 can add twenty grand even though it "only" sounds like a few feet.
If your yard is tight, a smaller pool isn't a consolation prize. A well-designed 12x24 with a good deck beats an oversized pool crammed against the fence every time.
Where the rest of the money goes
The base pool is the headline. These are the line items that quietly build the final invoice:
- Decking: $8,000 – $25,000+ depending on material and square footage. Concrete is the value pick; pavers and travertine cost more and look it. This is where our pool deck work usually lives.
- Screen enclosure: $10,000 – $25,000 in the Albuquerque metro and the Rio Grande valley, and worth every dollar if you'd rather not skim leaves and dodge mosquitoes all season.
- Heater: $3,000 – $6,000 installed, plus running cost. Extends your swim season by months.
- Spa / hot tub add-on: $8,000 – $20,000 attached to the pool.
- Excavation & site access: the sneaky one. A flat, open yard is cheap to dig. Tight access, rock, or a high water table can add $5,000 to $15,000, and you won't know until they dig.
- Permits, fencing, electrical: $3,000 – $8,000, non-negotiable, and required by code before you fill it.
Add it up and it's easy to see how a "$55,000 pool" becomes an $85,000 project. That's not a bait-and-switch — it's the difference between the pool and the backyard the pool lives in.
What it costs after the build
The sticker price gets all the attention, but a pool costs money every month you own it. Budget for it up front so it doesn't surprise you in year one:
- Weekly service or chemicals: $100 – $250 a month in the Albuquerque metro and the Rio Grande valley, depending on whether you clean it yourself or hire it out. Longer swim seasons mean more of both.
- Electricity for the pump: $30 – $150 a month, less if you run a variable-speed pump.
- Water and heating: a few hundred a year to top off evaporation, more if you heat.
- Insurance: most carriers bump your homeowner's policy modestly for a pool, often around $50 to $100 a year, plus a fence requirement.
None of that is scary on its own, but it's real. A pool is a lifestyle purchase with a monthly bill attached, closer to owning a boat than buying a couch. If the ongoing number matters to you, gunite and fiberglass are cheaper to run long-term than vinyl, since you're not buying a new liner every several years.
The opinion nobody selling you a pool will say out loud
Don't buy the fanciest automation package on your first pool. The color-changing lights, the phone-app everything, the auto-cover, the waterfall with a name — it's a fast $15,000 to $30,000, and half of it goes unused by year two. Spend that money on bigger decking, a heater, and quality equipment instead. You'll use those every single day; you'll use the app-controlled bubbler feature for exactly one cookout.
Get the bones right — size, finish, deck, heater — and add the toys later when you know how you actually use the pool. A pool you grow into beats a pool you overspent on to impress people who visit twice a summer.
So what does it really cost to build?
Here's the honest framing. For a solid, mid-size inground pool in Albuquerque with a real deck and the basics done right, budget $60,000 to $90,000 all-in. Go small and simple and you can start near $45,000. Go big with a spa, enclosure, and premium hardscape and you'll clear six figures without trying.
You've probably seen the "we got three quotes and only one showed up on time" story play out with pools more than any other trade. The cheapest bid is cheap for a reason: thinner shells, skipped steel, a crew that vanishes at 80% done. A pool is a 20-year purchase poured into your yard. Buy it like one.
When a new pool isn't the answer
If you already have a pool that holds water but looks like it was built during a different presidency, you may not need a new build at all. Resurfacing and updating an existing pool runs $8,000 to $25,000 — a fraction of ground-up cost — and that's exactly what our pool remodeling work is for. New coping, new finish, new tile, and it's a different backyard.
Only go new when the shell is failing, the layout is wrong for your yard, or you're starting from bare grass. Then it's a new pool or a full remodel from the ground up.
The bottom line
An inground pool in Albuquerque costs what a small kitchen renovation costs — $45,000 to $75,000 for the pool, more once you build out the backyard around it. Size and material set the floor; decking, enclosure, and features set the ceiling. Know which of those you actually want before you sign anything.
Want a real number instead of a range? Albuquerque Pool Pros builds and remodels pools across Albuquerque and the Albuquerque metro and the Rio Grande valley, and we'll walk your yard, price it honestly, and tell you where you can save. Free quote, no pressure: call (855) 498-0935.
Ready for a free quote in Albuquerque?
Albuquerque Pool Pros — free estimate, clear scope, no pressure. Use the form on this page or jump to the homepage quote.
Related services in Albuquerque
Albuquerque Pool Pros money pages — go straight to the service you need.
- Fiberglass Pool Installation →
Fiberglass pool installation runs three to five weeks in Albuquerque instead of the three months a gunite build takes, and in a market where excavation is the expensive part it is often the cheaper answer too. The shell is molded at a factory, trucked in, craned into a prepared hole, plumbed, backfilled with washed gravel, and decked.
- Pool Remodeling & Renovation →
Pool remodeling in Albuquerque usually means one specific pool: something built between 1975 and 1995 with a deep diving well nobody uses, a narrow shallow end, cracked cool-deck, one yellow light, and a screaming single-speed pump. Structurally most of those shells are fine — what is finished is everything attached to them, and that is exactly what a remodel replaces.
- Pool Resurfacing & Replastering →
Pool resurfacing and replastering comes due faster in Albuquerque than the manufacturer's brochure suggests, thanks to a combination unusual to this market: extreme high-altitude UV, hard fill water heavy in calcium, and a daily temperature swing that cycles the surface. White plaster that might give fifteen years on the coast frequently goes chalky, rough, and mottled here around year eight or ten.
- New Pool Construction →
New pool construction in Albuquerque is a soils problem before it is a design problem, because somewhere under most lots in this metro sits caliche — a cemented calcium carbonate hardpan that ranges from a nuisance to something that stops a standard excavator cold. What we build on top of it is gunite: a tied rebar cage, concrete shot pneumatically in one placement, and a seven-day water cure.
- Waterline Tile & Coping →
Waterline tile and coping replacement is the maintenance problem that is genuinely worse in Albuquerque than almost anywhere else. Fill water here is hard, evaporation concentrates it further, and the result is a chalky white calcium band along the tile line that thickens every single season.
Frequently asked questions
How much does it cost to install an inground pool in Albuquerque?
Most inground gunite pools in Albuquerque, NM land between $45,000 and $75,000 installed. Fiberglass runs about $40,000 to $85,000, and vinyl liner is the cheapest entry at $35,000 to $65,000. Add decking, a heater, and a screen enclosure and the total climbs from there. For a real number on your yard, call Albuquerque Pool Pros at (855) 498-0935.
Can I get an inground pool for $30,000?
Sometimes, but barely. A small vinyl liner pool with a basic deck can sneak in around $30,000 to $40,000 in Albuquerque. A true gunite pool at that price is almost always missing something — the decking, the enclosure, or the fine print. If a quote looks that low, ask what's not in it.
Can I get an inground pool for $20,000?
Not a full inground build. At $20,000 you're looking at a semi-inground pool, a very small vinyl kit you finish yourself, or a resurface job on an existing pool. A ground-up inground pool in Albuquerque that lasts 20 years starts higher, and anyone promising otherwise is quoting you half a pool.
What is the biggest factor in inground pool cost?
Size and material, in that order. Every extra foot of pool is more excavation, more concrete, more water, and more decking around it. After that it's the finish and the features — a heater, spa, tanning ledge, and enclosure can add $15,000 to $40,000 on their own.
Does an inground pool add value to my Albuquerque home?
In a warm market like the Albuquerque metro and the Rio Grande valley, usually yes. A well-built pool tends to return roughly 5% to 8% of your home's value and helps the house sell faster, since buyers here expect a backyard they can actually use in July. A cracked, dated pool can do the opposite, which is why the build quality matters more than the brochure.
Local context
How this applies in Albuquerque, NM
Every article here is written from pool work done in Albuquerque and the Albuquerque metro and the Rio Grande valley, so the numbers reflect local labour, permit and material costs rather than a national average. Your own job can land either side of them depending on access, the condition of what is already there, and the materials you pick — gunite and shotcrete shells, PebbleTec and polished quartz interiors, flagstone and travertine coping.
The way to turn any of this into a real answer is to have someone look at your actual situation. The free estimate is free, itemized and written down, with no deposit and no obligation. Call (855) 498-0935 or start on the Albuquerque Pool Pros homepage.
Areas Albuquerque Pool Pros covers
Albuquerque first, then the surrounding communities of the Albuquerque metro and the Rio Grande valley. Each has its own page with local detail rather than a copy of this one:
- Rio Rancho, NM — Sandoval County, population 104,000
- Santa Fe, NM — Santa Fe County, population 87,500
- South Valley, NM — Bernalillo County, population 38,300
- Los Lunas, NM — Valencia County, population 17,200
- North Valley, NM — Bernalillo County, population 11,100
- Grants, NM — Cibola County, population 9,160
Or jump to the full list of Albuquerque services.
More from the Albuquerque Pool Pros blog
- Fiberglass Pool vs Gunite for Albuquerque Yards
Fiberglass vs gunite pools compared on cost, install time, upkeep, and lifespan — plus which fits a Albuquerque, NM backyard.
- Pool Plaster vs Pebble Finish for Albuquerque Pools
Pool plaster vs pebble finish in Albuquerque, NM — cost per square foot, how long each lasts, and when white plaster wins.
- Pool Heater Cost in Albuquerque: Gas, Pump or Solar
Pool heater cost in Albuquerque, NM — install prices for gas, heat pump and solar, real running costs, and when you need no heater.
The Albuquerque Pool Pros Team
pool specialists serving Albuquerque, NM
Written by the Albuquerque Pool Pros team — insured pool pros with 15+ years serving Albuquerque, NM and the surrounding area.